SRS Indicator Does Not Come On

SRS indicator does not come on

1. Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.

Does the SRS indicator come on?

YES - Intermittent failure, system is OK at this time.

NO - Go to step 2.

2. Connect the HDS to the DLC.
3. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit.
4. Check for PGM-FI, Body Electrical, and SRS DTCs with the HDS.

Are there any PGM-FI, Body Electrical, or SRS DTCs?

YES - Go to the indicated DTCs troubleshooting.

NO - Go to step 5.

5. Do the gauge control module self-diagnostic function.

Does the SRS indicator come on?

YES - Faulty SRS unit; replace the SRS unit.

NO - Faulty gauge control module; replace the gauge control module.