Operation CHARM: Car repair manuals for everyone.

Scuff Plate: Service and Repair




Interior Trim Removal/Installation - Door Areas

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

Front Door Sill Area

NOTE:

- Put on gloves to protect your hands.
- Take care not to bend or scratch the trim or the panels.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Release the hooks (A) and the tabs (B) from the kick panel (C) and the B-pillar lower trim (D), and pull up the front door sill trim (E) by hand to detach the clips (F), then remove the trim.





2. If necessary, pull up the front side outer trim (G) to detach the clips (H), then remove the trim.

3. Remove the driver's side kick panel (A) or the passenger's side kick panel (B).

1. Pull out the door opening trim (C) as needed from the kick panel hooks (D) and the door opening flange.

2. Pull back the kick panel by hand to detach the clips (E, F), then remove the panel.

Driver's side





Passenger's side





4. Pull out the front door opening trim (A) from the trim hooks (B) and around the front door opening flange, then remove the trim.





5. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips, the hooks, and the tabs into place securely.

Rear Door Sill Area

NOTE:

- Put on gloves to protect your hands.
- Take care not to bend or scratch the trim or the panels.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Release the hooks (A) and the tabs (B) from the B-pillar lower trim (C) and the rear seat side trim (D), and pull up the rear door sill trim (E) by hand to detach the clips (F), then remove the trim.





2. If necessary, pull up the rear side outer trim (G) to detach the clips (H, I), then remove the trim.

3. Pull out the rear door opening trim (A) from the trim hooks (B) and around the rear door opening flange, then remove the trim.





4. Install the trim in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips, the hooks, and the tabs into place securely.