Utility Pocket Housing Removal / Installation

Utility Pocket Housing Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the trim or the panels.

1. Remove the center trim Dashboard Center Trim Removal / Installation.

2. Remove the screws.






3. Gently pull out along the upper portion of the utility pocket housing (A) to detach the clips, then lower the front side down to release the pins (B) from the shift lever bracket (C).






4. Gently pull out the utility pocket light bulb socket (A), then remove the utility pocket housing (B).





5. Install the pocket housing in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Make sure the bulb socket is connected securely.
- Push the clips and the pins into place securely.