Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

With SH-AWD

1. Remove the fuel tank unit.

2. Remove the bracket (A).





3. Remove the pressure regulator (B).

4. Install the parts in the reverse order of removal with new O-ring (C). When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank.

NOTE:

- Coat the O-ring with clean engine oil; do not use any other oil or fluid.
- Do not pinch the O-ring during installation.
- Use all the new parts supplied in the pressure regulator replacement kit.