Trunk / Liftgate Motor: Service and Repair

Power Tailgate Drive Unit Replacement

1. Remove the rear pillar trim Service and Repair.

2. Pull down the rear section of headliner Service and Repair.

3. Remove the support strut (A).





4. Disconnect the 2P and 8P connectors (B) from the drive unit (C).

5. Remove the mounting bolts and drive unit.

6. Install the parts in the reverse order of removal.

NOTE: After replacement, open and close the tailgate by auto operation and wait for 5 seconds. Repeat this procedure 5 times or more for proper operation.