A/T Shift Lever Boot and A/T Gear Position Indicator Panel Base Replacement

A/T Shift Lever Boot and A/T Gear Position Indicator Panel Base Replacement

1. Remove the shift lever assembly A/T Shift Lever Removal.

2. Remove the shift lever knob A/T Shift Lever Knob Replacement.

3. Remove the A/T gear position indicator panel light socket (A) from the A/T gear position indicator panel base (B).





4. Remove the A/T gear position indicator panel base from the shift lever bracket (C).

5. Remove the A/T gear position indicator panel (A) from the A/T gear position indicator panel base (B).






6. Release the lock tabs (A) on the shift lever boot using a screwdriver.






7. Replace the shift lever boot (A) or the A/T gear position indicator panel base (B).





8. Install the shift lever boot on the A/T gear position indicator panel base.

9. Install the A/T gear position indicator panel.

10. Install the A/T gear position indicator panel base (A) on the shift lever bracket (B).

NOTE: Take care not to pinch the harness.





11. Route the A/T gear position indicator panel light harness as shown. Take the slack out of the harness, and secure the harness at the harness guide.

12. Install the A/T gear position indicator panel light socket (C) in the A/T gear position indicator panel base.

13. Install the shift lever knob A/T Shift Lever Knob Replacement.

14. Install the shift lever assembly A/T Shift Lever Installation.