Front Grille Replacement

Front Grille Replacement

NOTE:

- Take care not to scratch the front bumper.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the front bumper Front Bumper Removal/Installation.

2. Remove the front grille (A) from the front bumper (B).

1. Remove the screws (C), and detach the clips (D, E).

2. Release the ribs (F).





3. Install the grille in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips and the hooks into place securely.

Front Grille Molding Replacement

NOTE:

- Take care not to scratch the front grille.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove these items:

- Front grille
- Front "A" emblem Service and Repair

2. Remove the front grille upper molding (A) from the front grille base (B).

1. Remove the screws.

2. Release the hooks (C) (eight places) and the projections (D) (three places) from the grille base.





3. Remove the screws, and pull out the front grille molding A to release the hooks (B) (two places) and the hooks (C) (four places) from the front grille base (D), then remove the molding and the center hood seal (E) from the grill base.






4. Install the moldings in the reverse order of removal, and push the hooks and the projections into place securely.