Accessory Control Display: Service and Repair

Interface Dial Removal/Installation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

1. Remove the audio-navigation and HVAC switch panel Audio-Navigation and HVAC Switch Panel Removal/Installation.

2. Remove the self-tapping screws and harness cover (A).






3. Disconnect the interface dial 13P connector (A).





4. Pry the interface dial (B) away from the audio-navigation and HVAC switch panel with KTC trim tools and applying even force as shown.

NOTE: Apply pressure slowly and steady until the knob and dial pops off.

5. Remove the interface dial (A), from the audio-navigation and HVAC switch panel.





6. Install the dial in the reverse order of removal.

NOTE: If the hard buttons do not work, but the jog dial does, recheck the interface dial connector (B) connection.