Operation CHARM: Car repair manuals for everyone.

BSI Radar Unit Removal/Installation




BSI Radar Unit Removal/Installation

1. Remove the rear bumper Service and Repair.

2. Disconnect the 6P connector (A), and detach the harness clips (B).





3. Remove the bolts and the BSI radar unit (C).

4. Clean the surface of the BSI radar unit.

5. Install the BSI radar unit (A) with the bolts.





6. Connect the 6P connector (B) and attach the harness clips (C).

7. Do the BSI radar unit aiming inspection BSI Radar Unit Aiming Inspection.