Upper Grille Cover Replacement

Upper Grille Cover Replacement

Special Tools Required

- KTC Trim Tool Set SOJATP2014
- Push Push Pin Puller 07AAC-SJAA100
*Available through the Acura Tool and Equipment Program; 888-424-6857

NOTE:

- Use the special tool to remove the clips.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
- Take care not to scratch the grille cover or the body.

1. Pull up the front portion of the upper fender trim, from each side .

2. Remove the clips (A, B). Detach the clip (C) with the appropriate trim tool, then remove the upper grille cover (D).





3. Install the upper grille cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.