Passenger's Dashboard Undercover Removal / Installation

Passenger's Dashboard Undercover Removal/Installation

NOTE: Take care not to scratch the dashboard or the related parts.

1. Remove the passenger's dashboard undercover (A).

1. Gently pull down the front edge of the undercover to detach the clips.

2. Disconnect the footwell light connector (B).

3. Pull away the undercover to release the pins (C) from the holders (D).





2. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.
- Make sure the connector is plugged in properly.
- Make sure the pins of the cover are installed securely to the holders.