Operation CHARM: Car repair manuals for everyone.

Rear Seat Head Restraint Cover/Pad Replacement




Rear Seat Head Restraint Cover/Pad Replacement

NOTE: Take care not to tear or damage the seat covers.

1. Remove the head restraint Rear Seat Head Restraint Replacement.

2. Unzip the head restraint cover (A), and pull it back, then remove the cover.






3. Separate the double-sided adhesive tapes (A), then remove the head restraint pad (B) and the head restraint pad molding (C) from the head restraint frame (D).





4. Rub off the remaining double-sided adhesive tape from the head restraint frame, then clean its surface with a shop towel dampened in isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the clean surface, then install new adhesive tape to the head restraint pad and the head restraint molding.

5. Install the cover and the pads in the reverse order of removal.