Navigation Display Unit Removal/Installation

Navigation Display Unit Removal/Installation

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.
- When prying components, use the handy remover set or equivalent.

1. Remove the dashboard center vent Dashboard Center Vent Removal/Installation.

2. Remove the screws and bolt (A) from the navigation display unit (B).






3. Pull out the navigation display unit. Then disconnect the connector (A) from the navigation display unit.





4. Install the navigation display unit in the reverse order of removal.