Front Bulkhead Brace Cover Replacement

Front Bulkhead Brace Cover Replacement

NOTE: When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the front bumper Service and Repair.

2. Detach the clips, and release the hook (A), then remove the front bulkhead brace cover (B).

NOTE: To release the clips, pry up on the center pin at the notch (C).





3. Install the cover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.