Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2012 >> TL AWD V6-3.7L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shifter A/T >> Service and Repair >> Removal and Replacement >> Paddle Shifter Replacement (A/T)

Paddle Shifter Replacement (A/T)




Paddle Shifter Replacement

SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service and Repair before doing repair or service.

1. Remove the steering wheel Steering Wheel Removal.

2. Remove the four screws (A) securing the steering wheel rear cover (B).





3. Pull the snap-fit portion (C) up carefully, then remove the steering wheel rear cover.

4. Disconnect the paddle shifter + (upshift switch) connector or the paddle shifter - (downshift switch) connector. Remove the screws (A) securing the paddle shifter + (upshift switch) (B) or the paddle shifter - (downshift switch) (C), then remove the paddle shifter + or the paddle shifter -.





5. Install a new paddle shifter + or a new paddle shifter - on the steering wheel.

6. Connect the paddle shifter + connector or the paddle shifter - connector securely, and install the connector in the connector holder.

7. Install the steering wheel rear cover with the screws.

8. Install the steering wheel Steering Wheel Installation.

pro multis · About Operation CHARM