Transfer Assembly Removal (M/T)

Transfer Assembly Removal

1. Raise the vehicle on a lift, and make sure it is supported securely.

2. Shift the transmission into neutral.

3. Remove the drain plug (A), and drain the MTF.





4. Reinstall the drain plug with a new sealing washer (B).

5. Remove exhaust pipe A Service and Repair.

6. Remove the bolt securing the transfer breather hose bracket (A), and disconnect the breather hose (B) from the breather pipe (C) on the transfer assembly.






7. Make reference mark (A) across the No. 1 propeller shaft (B) and the transfer companion flange (C).





8. Separate the No. 1 propeller shaft from the transfer companion flange.

9. Remove the transfer assembly (A) and the dowel pin (B) from the transmission.