Fuel Pressure Regulator: Service and Repair

Fuel Pressure Regulator Replacement

Without SH-AWD

1. Remove the fuel tank unit.

2. Remove the reservoir (A).





3. Remove the bracket (B).

4. Remove the fuel pressure regulator (C) and the backup ring (D).

5. Install the parts in the reverse order of removal with new O-rings (E) and a new bracket. When installing the fuel tank unit, align the marks on the fuel tank unit and the fuel tank.

NOTE:

- Coat the O-rings with clean engine oil; do not use any other type oils or fluids.
- Do not pinch the O-rings during installation.
- Use all the new parts supplied in the pressure regulator replacement kit.