Multiplex Integrated Control System Description
Multiplex Integrated Control System Description
Body Controller Area Network (B-CAN) and Fast Controller Area Network (F-CAN)
The body controller area network (B-CAN) and the fast controller area network (F-CAN) share information between multiple electronic control units (ECUs). B-CAN communication moves at a slower speed (125 kbps) for convenience related items and for other functions. F-CAN information moves at a faster speed (500 kbps) for "real time" functions such as fuel and emissions data. To allow both systems to share information, the gauge control module translates and relays the information from B-CAN to F-CAN and from F-CAN to B-CAN. This is called the Gateway Function.
Gateway Function
The gauge control module acts as a gateway to allow both systems to share information. The gauge control module translates and relays the information from B-CAN to F-CAN and from F-CAN to B-CAN.
Network "Loss of Communication" Error Checking Function
The ECUs on the CAN circuit send messages to each other. If there are any communication malfunctions on the network, the multi information display (MID) on the gauge control module can indicate the error messages by entering the gauge control module self-diagnostic function Testing and Inspection.
Self-Diagnostic Function (On-Board Diagnosis)
By connecting the HDS to the data link connector (DLC), the HDS can retrieve the diagnostic information from the driver's MICU via a diagnostic line called the K-LINE. The K-LINE is a separate communication line from the CAN lines, but it is connected to most of the CAN related ECUs. The driver's MICU is a gateway between the HDS and B-CAN related ECUs, and sends B-CAN diagnostic information to the HDS. When doing a function test with the HDS, the HDS sends an output signal through the K-LINE to the driver's MICU. The driver's MICU either relays the request to another ECU, or commands the function itself.
Wake-Up and Sleep Function
The multiplex integrated control system has wake-up and sleep functions to decrease parasitic draw on the battery when the ignition switch is in LOCK (0).
- In the sleep mode, the multiplex integrated control system stops functioning (communication and CPU control) when it is not necessary for the system to operate.
- As soon as any operation is requested (for example, a door is unlocked), the related control units in sleep mode immediately wake up and begin to function.
- When the ignition switch is turned to LOCK (0), and the driver's door is opened, then closed, there is a delay of about 40 seconds before the control unit goes from the wake-up mode to sleep mode.
- The sleep mode function will not occur if any door or the tailgate is open, or if a key is in the ignition switch.
NOTE: Sleep and Wake-Up Mode Test Multiplex Integrated Control System Sleep and Wake-Up Mode Test.
Fail-Safe Function
To prevent improper operation, the MICUs have a fail-safe function. In the fail-safe mode, the output signal is fixed when any part of the system malfunctions (for example, a faulty control unit or communication line).
Each control unit has a hardware fail-safe function that fixes the output signal when there is a CPU malfunction, and a software fail-safe function that ignores the signal from a malfunctioning control unit , which allows the system to continue operating normally.
Hardware Fail-Safe Control
When a CPU problem or abnormal power supply voltage is detected, the MICUs move to the hardware fail-safe mode, and each system output load is set to the pre-programmed fail-safe value.
Software Fail-Safe Control
When any data from the B-CAN circuit cannot be received within a specified time, or if an unusual combination of data is recognized, the MICUs move to the software fail-safe mode. The data that was not received is forced to a pre-programmed value.
Driver's MICU
Power Supply Voltage Monitoring Function
The driver's MICU monitors the power supply voltage (back-up voltage). If the voltage drops below 10 V, the driver's MICU does not store DTCs.
Entry Lights Control System (Ceiling Lights, Map Lights, Ignition Key Light)
The driver's MICU controls the interior light ON/OFF based on input signals from each switch.
Collision Detection Signal (CDS)
The driver's MICU controls the door lock actuators based on IG1 and SRS (CDS) inputs.
Key Interlock (A/T)
The driver's MICU controls the key interlock solenoid based on ignition switch ACCESSORY (I) position, the transmission range switch P position, and the park-pin switch inputs.
Rear Window Defogger Timer Operation
The driver's MICU controls the rear window defogger timer based on ignition switch and rear window defogger switch inputs.
Combination Light Switch
The driver's MICU controls the lighting system based on inputs from the combination light switch.
Daytime Running Lights
The driver's MICU controls the headlights as daytime running lights based on inputs from each switch.
Fog Lights
The driver's MICU controls the fog lights based on inputs from the fog light switch.
Headlight Auto-OFF Function
The driver's MICU controls the lighting system based on inputs from each switch.
Turn Signal/Hazard Warning Lights
The driver's MICU controls the turn signal/hazard warning lights based on inputs from the turn signal switch and the hazard warning switch.
Courtesy Light (Driver's Side)
The driver's MICU controls the driver's and left rear door courtesy lights based on inputs from the driver's and left rear door switches.
Wiper
The driver's MICU controls the wiper based on inputs from each switch.
Driver's Power Window Relay
The driver's MICU controls the power windows based on inputs from each switch.
Keyless Answer Back
The driver's MICU controls the lighting system and horns based on keyless signals sent by the B-CAN data.
Security Answer Back
The driver's MICU controls the lighting system and horns based on keyless signals sent by the B-CAN data.
Answer Back Response Operation
The driver's MICU controls the lighting system and horns based on keyless signals sent by the B-CAN data.
Power Door Locks
The driver's MICU controls the door lock actuators based on inputs from each switch.
Door Lock Response Operation
The driver's MICU controls the door lock actuators LOCK, UNLOCK, DRIVER'S UNLOCK, TRUNK UNLOCK based on the B-CAN door lock switch signals.
Keyless Entry System
The driver's MICU controls the door lock actuators based on inputs from each switch.
Keyless PANIC Operation
The driver's MICU controls the keyless PANIC operation based on keyless signal sent by the B-CAN data.
Auto Power Door Locks (LOCK Operation)
The driver's MICU controls the door lock actuators based on inputs from each switch.
Auto Power Door Locks (UNLOCK Operation)
The driver's MICU controls the door lock actuators based on inputs from each switch.
Security Alarm System
The driver's MICU controls the lighting system and horns based on inputs from each switch and the B-CAN data.
A/C Pressure Sensor
The driver's MICU sends A/C pressure sensor signal information when the ignition switch is in the IG1 position.
Passenger's MICU
Power Supply Voltage Monitoring Function
The passenger's MICU monitors the power supply voltage (back-up voltage). If the voltage drops below 10 V, the passenger's MICU does not store DTCs.
Courtesy Light (Passenger's Side)
The passenger's MICU controls the front passenger and right rear door courtesy lights based on inputs from the front passenger and right rear door switch.
Power Door Locks (LOCK)
The passenger's MICU controls the front passenger's side door lock actuators based on inputs from the driver's MICU.
Power Door Locks (UNLOCK)
The passenger's MICU controls the front passenger's side door lock actuators based on inputs from the driver's MICU.
Exterior Lights
The passenger's MICU controls the front passenger's side headlight, and parking lights based on inputs from the driver's MICU.
Automatic Lighting
The passenger's MICU controls the headlights and the parking lights based on inputs from the automatic lighting sensor.
Fog Lights
The passenger's MICU controls fog lights based on inputs from the fog light switch.
Rear Window Wiper/Washer (Sport Wagon)
The passenger's MICU controls the rear window wiper motor and rear window washer motor based on input signal from the wiper switch.
Washer Operation (Sedan)
The passenger's MICU controls the washer motor based on inputs from the wiper switch.
Windshield/Rear Window Washer (Sport Wagon)
The passenger's MICU controls the windshield washer and rear window motor based on IG1 signal.
Keyless Buzzer Operation
The passenger's MICU controls the keyless buzzer based on inputs from the answer back signals.
Passenger's Power Window Relay Circuit
The passenger's MICU controls the power window relay circuit in the passenger's under-dash fuse/relay box based on inputs from the power window switches.
HDS Inputs and Function Tests
Certain inputs happen so quickly that the Data List on the HDS cannot update fast enough. Hold the switch that is being tested while monitoring the Data List. This should give the HDS time to update the signal on the Data List.
Because the HDS software is updated to support the release for newer vehicles, it is not uncommon to see system function tests that are not supported.
Make sure that the most current HDS software is loaded.
Function Test:
