Cylinder Head Cover Removal

Cylinder Head Cover Removal

Front

1. Remove the engine compartment covers Service and Repair.

2. Remove the intake manifold.

3. Remove the three ignition coils from the front cylinder head Service and Repair.

4. Disconnect the EGR valve connector (A) and remove the harness holder mounting bolt (B) and the harness clamp (C).





5. Remove the harness holder (D) from the bracket.

6. Remove the front cylinder head cover.






Rear

1. Remove the engine compartment covers Service and Repair.

2. Remove the strut brace Frame Brace Replacement.

3. Remove the intake manifold.

4. Remove the three ignition coils from the rear cylinder head.

5. Remove the harness holder mounting bolts (A) and the engine ground cable (B).





6. Disconnect the three injector connectors (C) and the two harness clamps (D).

7. Remove the harness clamp (E) and disconnect the breather hose (F).

8. Remove the harness (G) from the upper cover.

9. Remove the engine hanger bracket (H).

10. Remove the harness holder mounting bolt (A) and disconnect the knock sensor connector (B) and the CMP sensor connector (C).






11. Remove the rear cylinder head cover.