Cabin Noise Sensor: Service and Repair

ANC/Active Sound Control Microphone Removal/Installation

Front (with premium audio)

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.

1. Remove the roof console, and disconnect the connector (A) from the front ANC/active sound control microphone (B).





2. Remove the screws and the front ANC/active sound control microphone.

3. Install the microphone in the reverse order of removal.

Rear

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a workshop towel under the parts when working on them to protect the face panel from scratches or other damage.

1. Remove the headliner Service and Repair.

2. Disconnect the connector (A), then remove the screws and the rear ANC/active sound control microphone (B).





3. Remove the cap (C) from the base (D).

4. Install the microphone in the reverse order of removal.