Front Floor Undercover Replacement

Front Floor Undercover Replacement

Left Side

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the left rear strake Rear Strake Replacement.

2. Remove the bolts, and detach the clips, then remove the left front floor undercover (A).

NOTE: To release the clips, pry up on the center pin at the notch (B).





3. Install the undercover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.

Right Side

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the body.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Remove the right rear strake Rear Strake Replacement.

2. Remove the bolts and the nut, and detach the clips, then remove the right front floor undercover (A).

NOTE: To release the clips, pry up on the center pin at the notch (B).





3. Install the undercover in the reverse order of removal, and note these items:

- If the clips are damaged or stress-whitened, replace them with new ones.
- Push the clips into place securely.