Resonator: Service and Repair

Intake Air Resonator Removal/Installation

1. Do the battery removal procedure Removal and Replacement.

2. Remove the air cleaner Service and Repair.

3. Remove the air intake cover (A), the intake air ducts (B).





4. Remove the front bumper Front Bumper Removal / Installation.

5. Remove the left front wheel.

6. Remove the clips (A), then remove the inner fender (B).






7. Remove the intake air resonator (A).

NOTE: When installing the resonator, use a new seal ring (B).






8. Disconnect ECM/PCM connectors A, B, and C, then remove the ECM/PCM (D).

NOTE:

- ECM/PCM connectors A, B, and C have symbols (A=(square), B=(triangle), C=(circle)) embossed on them for identification.
- Canada model: When disconnecting the ECM/PCM connectors, remove the ECM/PCM sub bracket (E).





9. Remove the battery base (A).






10. Remove the intake air duct (A).





11. Install the parts in the reverse order of removal.

12. Do the battery installation procedure Removal and Replacement.