Audio-Navigation and HVAC Switch Panel Removal/Installation

Audio-Navigation and HVAC Switch Panel Removal/Installation

With Navigation

SRS components are located in this area. Review the SRS component locations Locations, and the precautions and procedures Service and Repair before doing repairs or service.

NOTE:

- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.
- Lay a shop towel under the parts when working on them to protect the face panel from scratches or other damage.

1. Pull the audio-navigation and HVAC switch panel (A) out, then disconnect the connectors (B) from the audio-navigation and HVAC switch panel.





2. Remove the interface dial Service and Repair.

3. Install the switch panel in the reverse order of removal.