A/T Shift Lever Removal

A/T Shift Lever Removal

1. Move the shift lever to R.

2. Remove the shift lever knob A/T Shift Lever Knob Replacement.

3. Remove the A/T shift panel.

4. Release the lock tab (A) using a screwdriver, and remove the A/T gear position indicator (B).






5. Remove the center console Center Console Removal / Installation.

6. Remove the nut securing the shift cable end.






7. Unlock the retainer lock (A).






8. Rotate the socket holder retainer (A) counterclockwise (B) until it stops, and push the retainer lock (C) into the socket holder retainer to lock the retainer.






9. Slide the socket holder (A) away from the bracket as shown to remove the shift cable (B) from the shift cable bracket (C). Do not remove the shift cable by pulling the shift cable guide (D).






10. Disconnect the shift lever 6P connector (A), and remove the shift lever 6P connector from the shift lever bracket base (B).





11. Remove the shift lever mounting bolts (C), then remove the shift lever assembly (D).