With Manufacturer's Scan Tool

Procedures to Erase Memory
- After DTC memory has been checked leave ignition ON
- Press the "arrow" button.
- Display will appear as shown:

Rapid data transfer HELP
Select function XX

- Select function code.
Erase DTC Memory 05
- Display will appear as shown:

Rapid data transfer HELP
05 - Erase DTC Memory

- Press Q button to enter input.
- If memory is successfully erased the display will appear as shown:

Rapid data transfer
DTC Memory is Erased

- If Display appears as shown:

Caution DTC Memory was not checked

- The DTC Memory was not completely checked or the ignition was shut off before erasing the memory.
- Press the "arrow" button.

Rapid data transfer HELP
Select function XX