Blower Motor: Service and Repair

Fresh Air Blower -V2-, Removing and Installing
- Remove glovebox







- Remove electrical connector -B-
- Remove bolts -A- and remove fresh air blower with mounting plate from heater/air conditioner assembly.

Separating fresh air blower -V2- and mounting plate







- Depress locking tabs -A- and -B- with screwdriver.
- Separate fresh air blower from mounting plate.
- Disconnect electrical harness connectors -C-.


NOTE:







- When re-installing the fresh air blower to the mounting plate, check for correct installation position of tabs -A- and -B-.
- After installation check for correct fit or fresh air blower in heater/air conditioner assembly.