On Board Diagnostic (OBD), Initiating

On Board Diagnostic (OBD) of interior monitoring system, initiating

Conditions:
- Scan tool V.A.G 1551 connected. Refer to "Scan Tool Connecting And Initial Checks/Scan Tool Testing" under "Restraint Systems/Air Bag Systems", Testing and Inspection
- Anti-theft alarm not activated.

Indicated on display:


Rapid data transfer HELP
Select function XX


- Enter "45" for address word "Interior monitoring system" and confirm entry with Q key.

Indicated on display:


Rapid data transfer
Tester transmits address word 45


- Wait until the next display appears.

Equipment version without side curtain airbag system

The display on the scan tool V.A.G 1551 will show the control module identification code (example).


4D0951173B Interior monitoring sys. Dxx ->
Coding 00101 WSC 12345


Equipment version with side curtain airbag system

Control module identification is indicated on display of VAG 1551 Scan Tool (example).


4D0951177B Interior monitoring. Dxx ->
Coding 00001 WSC 12345


NOTE: You may print out the control module identification by pressing the PRINT key on the scan tool V.A.G 1551.


Control module identification (example)

- 4D0 951 173 B Part-No.; assignment
- Interior-monitoring Component designation
- Dxx Data status (software status) of control module
- Code 00101 Control module code
Coding. Programming Control Module (ECM) -J248-, (Function 07)
WSC 12345 Workshop Code of VAG 1551 which was used to perform the last coding

- Press -> key.

Indicated on display (function selection):


Rapid data transfer HELP
Select function XX


NOTE: The control module identification can be displayed again by entering function "01" for "Check Control Module Version" and confirming with the Q key.