Headlamp Alignment Actuator: Service and Repair

Headlight Beam Adjusting Motor (high Intensity Gas Discharge - Xenon- Headlights), Removing And Installing


NOTE: Always adjust headlights after headlight beam adjusting motors are removed, installed or replaced.


Removing

- For right headlight, remove back portion of intake air duct.
- Remove cover from headlight housing.







- Release headlight beam adjusting motor -1- on right headlight by rotating clockwise and on left headlight by rotating counterclockwise.
- Release ball joint from its socket by pushing laterally to left on right headlight and push to right on left headlight.
- Disconnect harness connector -2-.

Installing

- Install in reverse order of removal.