Fig. 4 Pulling Off Right Tapered Roller Bearing Inner Race

Differential, Disassembling and Assembling

Special Tools And Equipment

- VW447H Thrust Pad
- 30-11 Thrust Pad
- 40-105 Thrust Piece
- Kukko 20/10 Two-arm Puller Or Kukko 44/2 Puller

Notes:

- Replace both tapered roller bearings together.

Fig. 4 Pulling off right tapered roller bearing inner race






A - Kukko 20/10 two-arm puller or Kukko 44/2 puller

Notes:

- On a puller with a small spindle diameter, 30-11 thrust pad must be placed between 447H pressure washer and the puller.

- For transmissions with drive flange without polygon bearing, use 40-105 thrust piece.

- The differential has a notch under the bearing seat to install puller -A-.