Fig. 7 Installing Left Tapered Roller Bearing Inner Race

Differential, Disassembling and Assembling

Special Tools And Equipment

- VW401 Thrust Plate
- VW407 Punch
- VW4471 Thrust Pad
- 3296 Tube
- 40-21 Sleeve

Notes:

- Replace both tapered roller bearings together.

Fig. 7 Installing Left Tapered Roller Bearing Inner Race






WARNING!:

- Wear protective gloves

- Heat inner race to approximately 100 °C (212 °F), position and install.

Note:

- For transmissions with drive flange without polygon bearing use 40-21 sleeve.