Read Measuring Value Block (Scan Tool Function 08)

Read Measuring Value Block (Scan Tool Function 08)

Initiating "Read Measuring Value Block"

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -8-. This selects "Read Measuring Value Block" function 08.
- Press -Q- button to confirm input.

Indicated on display

Rapid data transfer Q
08 - Read Measuring Value Block

- Press -Q- button to confirm input

Indicated on display

Read Measuring Value Block HELP
Input display group number XXX

- Input display group number (from table) and press -Q- button to confirm input.

The selected measuring value block is now displayed in standard form.

Display group overview

NOTE:
- For an instrument cluster replacement, data from display groups 10...15 must be printed out.
- Measuring value blocks 125 and 126 indicate the participants in the powertrain data- BUS.
- Measuring value block 130 indicates the participants in the comfort system databus.
- Measuring value block 140 indicates the participants in the information data-BUS
- Display will always indicate the actual values obtained from the sensors. The values which appear on the instrument cluster are filtered and may be different.
- If the actual engine coolant temperature is between 80 degrees C and 100 degrees C, instrument cluster will always show 90 degrees C.

Measuring value block 001

Measuring value block 2

Measuring value block 3

Measuring value block 10

NOTE: If the value "128" in display field 2 was changed due to a customer complaint, the changed value must be transferred when replacing instrument cluster.

Measuring value block 11