With Manufacturer's Scan Tool

Fault Memory, Interrogating

- Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 - Engine electronics" from list. Engine should be idling. Connecting VAS 5051 Scan Tool

NOTE: If engine will not start, crank it with starter for at least 5 seconds and then always leave ignition switched on.

Indicated on VAS 5051:







- From list -1- select diagnostic function "02 - Interrogating fault memory".

Indicated on VAS 5051:







1 Content of fault memory:
- 0 faults detected
or
- X faults detected
2 Fault
- Fault code
- Fault location
- Type of fault

A - Faults detected:
- Print out information on screen or self-diagnosis log.
- End function "02 - Interrogating fault memory" by touching <- key.

Indicated on VAS 5051:







- Eliminate fault(s) in line with fault table. Related Tests, Information and Procedures
- Select diagnostic function "02 - Interrogating fault memory" again in list and erase fault memory. With Manufacturer's Scan Tool
- Select diagnostic function "06 - End of output" in list. Ending Output (Function 06)

B - No fault detected:
- Select diagnostic function "06 - End of output" in list. Ending Output (Function 06)