Readiness Code Reading
Readiness code, displaying
Test sequence
- Connect Vehicle Diagnostic, Testing and Information System VAS 5051 or VAG 1551 Scan Tool to vehicle and select Control module for engine electronics "Address Word" 01. The ignition must be switched on.
When indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q- button to confirm input.
When indicated on display
Read Measuring Value Block Q
Input display group number XXX
- Press buttons "086" for "display group number 086" and press -Q- button to confirm input.
When indicated on display
Read Measuring Value Block 86 ->
1 2 3 4
Check readiness code in display field 1
- Specified value: 0 0 0 0 0 0 0 0
If the specified value in display field 1:
"00000000" is obtained:
- Press -> button.
Indicated on display (function selection)
Rapid data transfer HELP
Select function XX
- Check DTC memory (No malfunction should be stored in the DTC memory).
If specified value is not reached:
- Generate readiness code, Readiness Code, Generating