Reading

Read Measuring Value Block (Function 08)

Use this function to observe various instrument cluster inputs and stored data.

The measuring value block is divided into 12 display groups, each containing 4 display fields.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -8- to select "Read Measuring Value Block"function 08.

Indicated on display:

Rapid data transfer Q
08 Read Measuring Value Block

- Press -Q- button to confirm input

Indicated on display:

Read Measuring Value Block HELP
Enter display group number XXX

- Enter desired Display Group number => table beginning from.
- Press -Q- button to confirm input.

The Read Measuring Value Block selected appears in the standard format.

Interpreting displayed information from.

NOTE:
- The display on the scan tool will always show the actual values obtained from the senders and sensors. The values which appear on the instrument cluster are filtered and may not be the same.
- If the actual coolant temperature is between about 80 degrees C and 100 degrees C, the instrument cluster will always show 90 degrees C.
- Data from display groups 10 to 15 must be recorded prior to instrument cluster replacement.
- Read Measuring Value Block 140 indicates all Control Modules that are active on part of the Information CAN-Bus network.
- The display groups shown here are the only ones which can be called up for the instrument cluster.

Display groups, summary

Display Group Number 001 - 002:

Display Group Number 003 - 012:

Display Group Number 013 - 140: