Leak Detection Pump

Leak Detection Pump

Removing

- Switch off ignition.

- Remove left rear wheel.

- Remove left rear wheel housing liner.

- Remove hose connectors - 1 -, - 3 - and - 4 -.





- Disconnect electrical harness connector - 2 - from Evaporative Emission (EVAP) Canister Purge Solenoid Valve 2 (N115).

- Remove bolts - arrows -.

- Remove Leak Detection Pump (LDP) (V144) and disconnect the electrical connection.

- Remove detection pump from bracket.

Installing

• Tightening specifications. Refer to => [ Leak Detection Pump Assembly Overview ] Leak Detection Pump Assembly Overview.

Installation is in reverse order of removal, note the following:

• Secure all hose connections with hose clamps appropriate for the model.

- Install left rear wheel housing liner.