Read Measuring Value Block (Data Block) (Function 08)

Measuring Value Block, Reading

Requirements
- Coolant Temperature at least 80 degrees C.
- Electrical consumers switched off (radiator coolant fan must NOT run during test).
- A/C switched off.

Work sequence
- Connect VAS5051 tester, Vehicle Diagnostic, Testing and Information System VAS 5051, Connecting and Selecting Functions and select vehicle system "01 - Engine electronics". Engine must run at idle during this.







Display on VAS5051:
- Select diagnostic function "08 - read measured value block" in selection -1-.







Display on VAS5051:
1 - Enter display group Max. input value = 255
- Enter desired 3-digit display group number in button field -2- and press -Q- button to confirm input.

NOTE: Which display group should be chosen depends on current function and component tests.







Indicated on VAS5051 for display group 000:
1 - Display group 0
2 - Display field 1 2 3 4 5 6 7 8 9 10







Indicated on VAS5051 for display group 001 to 255:
1 - Display group X
2 - Display field 1
Display field 2
Display field 3
Display field 4

NOTE:
- If no display follows, a display field is not assigned.
- To switch to a different display group, proceed as follows:

Display group VAS5051 tester
higher Press s button.
Lower Press t button.

- Press <- button to end function "08 - Read measuring value block".