12 Volt Socket

12 Volt Socket

Removing





- Switch off all electrical components.

- Remove ignition key.

- Remove lining mat - 5 -.

- Break out cross - 4 -.

- Press bracket clip - 2 - through opening upward with a flat-head screwdriver.

- Remove bracket - 2 - with socket - 1 - in - direction of arrow - from center console - 3 -.

- Disconnect electrical connector on socket.

- Remove bracket - 2 - with socket - 1 -.

• The bracket with socket unit is not designed to be disassembled.

Installation

To install, perform the steps used in removal in reverse order.