01V,01VA Transmission

Oil Pan

Special tools, testers and auxiliary items required

• Oil Collecting and Extracting Device (V.A.G 1782 )

• Protective glasses

Removing

CAUTION!
Do not run engine or tow vehicle with oil pan removed or when there is no ATF in the transmission.

• General repair notes. Refer to => [ Repair Information ] Repair Information.

• Observe cleanliness rules when working on automatic transmissions. Refer to => [ Cleanliness Working Conditions ] Cleanliness Working Conditions.

- Remove noise insulation - arrows -.





- Place Used Oil Collection and Extraction Device ( V.A.G 1782) under transmission.

CAUTION!
Wear protective glasses.

- Remove ATF drain plug - 1 -.





- Drain ATF.

• Observe disposal regulations.

- Remove oil pan bolts - arrow - diagonally and remove oil pan.





Installing

Install in reverse order, paying attention to the following:

• Replace gaskets and oil seals.

- Clean all magnets in the depressions of the oil pan. Ensure that the magnets are in full contact with the oil pan.

- Thoroughly clean the sealing surface, removing the residual gasket material completely.

- Tighten oil pan bolts - arrow - diagonally in several stages.

- Tighten new drain plug - 1 -.





- Top off ATF. Refer to => [ ATF, Changing and Filling after a Repair ] ATF, Changing and Filling After a Repair.