Flywheel, Multitronic

Flywheel, Multitronic

Special tools, testers and auxiliary items required

• Counter Hold Tool (10-201)

Removing

• Engine or transmission removed.

- Remove damper unit - arrow -.





- Mark the position of the flywheel - arrow - to the crankshaft.





- Insert Counter Hold Tool (10-201) to loosen bolts.

- Remove flywheel.

Installing

Installation is in reverse order of removal, note the following:

- Use new bolts when securing.

- Turn over Counter Hold Tool (10-201) to tighten bolts.

- Install the damper unit.

Tightening specification





* 90° corresponds to one quarter rotation.

* Replace bolts.