Procedures

Tail Pipe, Aligning

- Check distance of end pipes at left and right to bumper:





• Dimension - x - left = dimension - x - right

If necessary, correct dimension - x - as follows:

- Loosen nut - arrow - of brace between exhaust pipes.





- Adjust the distance between the rear mufflers.

- Tighten nut to 23 Nm.

- Check distances - y - and - z - of end pipes to bumper:





• Dimension - y -: greater than 20 mm.

• Dimension - z -: 9 to 14 mm

- If necessary, check whether the exhaust system is aligned tension-free:

• Vehicles with AWD. Refer to => [ Exhaust System, Aligning ] Procedures.

• Vehicles with FWD. Refer to => [ Exhaust System, Aligning ] Procedures