Right Combination Valve

Right Combination Valve

Removing

- Pull rear engine cover off - arrows -.





- Remove cover - 1 - in engine compartment (right side).





- Remove solenoid valve retaining plate - 3 - - arrows -.





- Disconnect air duct hose - 1 - at Mass Air Flow (MAF) Sensor (G70).

- Disconnect crankshaft housing ventilation hose - 4 - from air duct - 2 -.

- Remove screw - arrow - and remove air duct - 2 - from Throttle Valve Control Module (J338).





- If equipped, disconnect hose - 1 - from air duct.

• To improve clarity, shown from the rear with the engine removed.

- Remove bolts - 1 -, - 2 - and remove combination valve.





- Disconnect vacuum hose - arrow -.

Installing

Installation is in reverse order of removal, note the following:

• Replace seals.

Tightening Specifications