Power Steering Fluid: Testing and Inspection

Power Steering, Checking Fluid Level

- Do not run engine and turn front wheels to straight ahead position.

Fluid, when cold (outside temperature approximately +20 °C):

- Remove the cap.

- Wipe dipstick off with a clean cloth.

- Screw cap on hand-tight and unscrew again.

The cap must be fully screwed in order to obtain an accurate fluid level reading.

- Check fluid level: Oil level must be within "MAX" marking.





Fluid at operating temperature (engine oil temperature +80 °C)

- Check fluid level: Oil level must be 10 mm above "MAX" marking.

• Fluid must be drawn off if the level is above the specified range.

• If oil level is below aforementioned area, then the hydraulic system must be checked for leaks. It is not sufficient to merely top off the fluid.

• Do not use drained hydraulic oil.