Oil Pan Overview
Oil Pan Overview
Balance shaft module, oil pump, refer to => [ Balance Shaft Module with Oil Pump Overview ] Balance Shaft Module With Oil Pump Overview.
Oil filter bracket, refer to => [ Oil Filter Bracket Overview ] Oil Filter Bracket Overview.
1 Bolt
• 9 Nm
2 Oil Level Thermal Sensor (G266)
• Removing and installing, refer to => [ Oil Level Thermal Sensor (G266) ] Service and Repair
3 Seal
• Replace
4 Bolt
• Tightening specification and sequence, refer to => [ Front Sealing Flange Tightening Sequence ] Front Sealing Flange Overview
5 Oil Pan
• Clean sealing surface before installing
• Removing and installing, refer to => [ Oil Pan ] Oil Pan
6 Oil Baffle
7 Bolt
• 9 Nm
8 Oil Return Line
9 Bolt
• Tightening specifications => [ (Item 13) Bolt ] Turbocharger Overview
10 Gasket
• Replace
11 BOLT
12 Oil Drain Plug
• 30 Nm
13 Seal
• Replace
14 Cover
Oil Pan - Tightening Specifications and Sequence
- Tighten the oil pan bolts in three stages as follows:
- Tighten the bolts from the oil pan to the cylinder block - 1 to 20 - in a diagonal sequence to 5 Nm.
- Tighten the bolts from the oil pan to the transmission - arrows - to 40 Nm.
- Tighten the bolts from the oil pan to the cylinder block - 1 to 20 - in a diagonal sequence to 15 Nm.
Oil Dipstick Guide Tube - Tightening Specifications
- Tighten the double bolt - arrow - to 6 Nm.