Convertible Top Position Switches

Convertible Top Position Switches

- Remove rear side trim.





- Disconnect electrical connector on Convertible Top Control Module (J256).

- Remove convertible top cable from guides and cable ties for body wall and convertible top frame.

- Remove switch bolts - 1 -.





- Carefully remove convertible top position switch from bolting point mounts.

• The convertible top switch unit described is located on the right main guide.

• The convertible top should be brought to the appropriate position to remove respective convertible top switch unit bolt.

Tightening torque => [ Convertible Top Assembly Overview ] Convertible Top Assembly Overview.