Symphony II+, Transport Mode, Activating and Deactivating

Symphony II+, Transport Mode, Activating and Deactivating

Transport mode must be activated before sending every "Symphony II+" radio.

After activation, the internal CD changer drive is in transport position.

After replacing a "Symphony II+", transport mode must be deactivated after installation.

Transport mode, activating

"Symphony" is connected and installed.

- Press station buttons 3 and 5 and TONE button at the same time.

After about 5 seconds, "TRANSPORT" appears on the radio display.

Transport mode, deactivating

" Symphony II+" is connected and installed.

- Press CANCEL button.

"TRANSPORT" display goes out.

Transport mode is deactivated.