Selector Mechanism Cover

Selector Mechanism Cover

Removing

- Remove selector lever handle => [ Selector Lever Handle ] Selector Lever Handle.

- Remove front ashtray insert - 1 - by pressing knob - arrow -.





- Remove bolt - arrow - and front ashtray housing.





- Disconnect electrical connector.

- Pull center console switch trim up and off - arrows -.





- Disconnect electrical connector.

- Release retaining hooks - 1 - on both sides of shift mechanism - arrow - and raise cover - 3 - up.





- Disconnect electrical connector - 2 - and remove cover.

Installing

Install in reverse sequence; note the following points:

- Install front ashtray.

- Install selector lever handle => [ Selector Lever Handle ] Selector Lever Handle.