Selector Lever Handle

Selector Lever Handle

Removing

- Place selector lever in position "D".

- Rotate sleeve - 1 - clockwise until it engages. Slide sleeve down in this position.





- Remove handle - 2 - from selector lever.

Installing

Install in reverse sequence; note the following points:

- Place selector lever in position "D".

- Place sleeve - 1 - on selector lever.

- Press handle - 2 - onto selector lever as far as stop.

• Installation position: Switch faces driver.

- Slide sleeve up while rotating until tabs on sleeve engage in slits on handle.

- Rotate sleeve counter-clockwise until it engages.