Rear Side Curtain Airbag Crash Sensor

Rear Side Curtain Airbag Crash Sensor

CAUTION!
Observe safety precautions for working on airbags => [ Airbag Safety Precautions ] Airbag Safety Precautions.

Removing

• The battery must be disconnected when the ignition is switched on.

- Switch on ignition.

- Disconnect the battery ground strap.

- Remove rear wheelhousing trim => [ Rear Wheel Housing Trim ] Trim.

- Remove bolts - 2 - (Qty. 2).





- Disengage tab on yellow connector and disconnect connector.

Installing

- Place crash sensor - 1 - on to threaded pins.





- Secure crash sensor - 1 - with nuts - 2 - (Qty. 2).

• Tightening torque: 9 Nm.

CAUTION!
No one should be in vehicle when connecting battery.

- Connect battery ground strap.

• Follow the safety precautions after connecting the battery.

• If Airbag Malfunction Indicator Lamp (MIL) (K75) signals a malfunction after installation, DTC memory must be checked, erased and once again checked using Vehicle Diagnosis, Testing and Information System (VAS 5051 A).