Input Shaft With 6 Lining Discs Assembly Overview

Input Shaft with 6 Lining Discs Assembly Overview

CAUTION!
• Note the difference between input shafts with 6 and 7 lining discs. Refer to => [ General Information ] General Information.





1 Input shaft seal

• Replacing, Refer to => [ Input Shaft Seal ] Input Shaft Seal.

2 Input shaft cover circlip

• Replace with same thickness.

3 Input shaft cover

• After removing cover, input shaft cover ball bearing must be replaced. Refer to => [ Input Shaft Cover Ball Bearing ] Input Shaft Cover Ball Bearing.

4 Piston

• Check for wear, refer to => [ Input Shaft Checking for Wear ] Testing and Inspection.

5 Pressure plate

• Check for wear, refer to => [ Input Shaft Checking for Wear ] Testing and Inspection.

6 Corrugated spring washer

7 Upper adjustment disc

• Determine thickness, refer to => [ Input Shaft Adjusting with Air Gap Determination ] 01J Transmission.

• Replace

8 Coated plate

• Quantity: 6

• Replace

9 Outer plate

• Quantity: 5

• Replace

10 Lower adjustment disc

• Determine thickness, refer to => [ Input Shaft Adjusting with Air Gap Determination ] 01J Transmission.

• Replace

11 Input shaft cylinder

• Check for wear, refer to => [ Input Shaft Checking for Wear ] Testing and Inspection.

12 O-ring

• Replace

13 Oil pipe

• Check for wear, refer to => [ Input Shaft Checking for Wear ] Testing and Inspection.