Speech Input Control Module

Speech Input Control Module

- Turn off all electrical components.

- Remove ignition key.

Removing

- Remove right A-pillar trim.

- Remove right front seat.

• Safety belt on seat frame must not be loosened.

- Fold back the floor mat.

- Release electronics box cover - arrows - and remove it.





- Disconnect connector - 2 - on Speech Input Control Module (J507) - 1 -.





- Remove Speech Input Control Module (J507) - 1 -.

Installing:

- Install in reverse order.

- Perform adaptations and coding on Speech Input Control Module (J507) if necessary.